|
Order a
Hyprotherm
Wood-Coal-Propane Furnace TODAY!
Layaway a furnace NOW
with ZERO INTEREST!
The Hyprotherm
Wood/Propane/Waste Oil Series
185
is
only $5982
including a the propane burner
sleeve and flange,
also comes with a pump installed and a 2nd set of ports standard, a built-in heat exchanger
for your
domestic hot water, a Ranco Thermostat, AUTOMATIC force air
induction fan
AND CHIMNEY CAP!
Burner sleeve, with flange; shown on left side of this furnace.
Flange can be drilled to accept any
configuration of waste oil burner or propane burner or heating oil
burner.
Many types available and are to be
purchased by end-user
to keep prices low, with no mark-up!
Sleeve goes through firebox, water
jacket and insulation.
Sleeve protrudes into the firebox,
where the flame is heating
up the water, instead of the wood.
Only a small portion of the sleeve
is shown here,
coming through the insulation and outside tin.
The
Hyprotherm
Wood/Propane/Waste Oil Series 250
is
only $6792
The Hyprotherm
Wood/Propane/Waste
Oil Series
300
is
only $7142
The Hyprotherm
Wood/Propane/Waste
Oil Series
350
is
only $7992
The Hyprotherm
Wood/Coal/Propane/Waste
Oil
Series 185
is
only $6079
including Shaker Grates for
coal, AND the propane burner sleeve and flange, also comes with
a pump installed and a 2nd set of ports standard, a
built-in heat exchanger
for your
domestic hot water, a Ranco Thermostat, AUTOMATIC force air
induction fan
AND CHIMNEY CAP!
The Hyprotherm
Wood/Coal/Propane/Waste
Oil
Series 265 is
only $7266
The Hyprotherm
Wood/Coal/Propane/Waste
Oil
Series 300 is
only
$7616
The Hyprotherm
Wood/Coal/Propane/Waste
Oil
Series 340 is
only
$8703
The Hyprotherm
Wood/Propane/Waste
Oil
Series 450/633 TOP LOADER is
only
$12,590
We
can build a stove that will accommodate an LP burner for you. We put
a sleeve in through the firebox with a flange on it to bolt the
burner to. You supply the burner or we can get it and install it for
you.
Besides propane, it will
also accommodate a waste oil burner and a heating oil burner, as
well.
We have the template made for the last one we did. They used a:
Midco
International: Economite Power Gas Conversion Burners
Application:
Residential, Small-Commercial — Natural or Propane Gas
Capacity Range:
50,000 to 700,000 BTU/hr
Convert a residential or small
commercial oil fired furnace or boiler to clean, efficient burning,
economical gas. Economite power burners feature a small, quiet
motor-driven blower wheel that provides the right amount of
combustion air for a compact, steady, efficient flame. When compared
to atmospheric burners, Midco Economite power burners cut fuel costs
by at least 10%. Inshot design puts all the components outside the
fire box and away from heat. Components last longer, service is
easier and maintenance costs are reduced.
http://www.midcointernational.com/products/economite_ec/index.htm
The cost for us to add the sleeve and flange is only $265.
You can also use an economical waste oil burner.
Take a look at these websites:
http://www.wasteoilheat.com/waste-oil-burners.shtml and
http://www.peakalternative.com/alternative-energy-waste-oil-burners.php
OUR STANDARD
FIREBOX; WHAT WE CALL THE 3/8" FIREBOX, IS ACTUALLY
OVER 4/10th OF AN INCH THICK! (.427)
To purchase the Shaver
Outdoor Furnace,
please call us at
828-683-8055.
We are normally here 9 AM -9 PM ET - except
Tuesday, Friday and Sat; when we close at 4 PM ET.
We can arrange delivery to your door,
hassle free and there is NO SALES TAX when the factory ships
the furnace to you (unless you are in
Arkansas).
We usually deliver on our truck and trailer and unload it!
Plus we have the ability to move it to your pad, if
desired. We also ship by freight to Alaska, Canada,
States West of Kansas and overseas.
It will normally only
take 2 weeks to build the furnace (with your choice of 20 colors),
if it is shipped on our truck. It would go on the next truck going
your way.
PLEASE CALL to verify times
If it is
shipped freight, it can usually go as soon as it is put on a steel pallet and crated
($125)
A furnace can be
picked up in about w weeks.
When the furnace is delivered, it
can be hooked up in a couple of hours!
_______________________
Remember to order your parts (828-687-4074),
pour your concrete pad (or use solid concrete pavers), dig
the trench, lay the insulated Pex pipe and wire,
backfill it, do your electrical hookup, thermostat
installation, install the heat exchanger and hook up
the hot water heater.
When the furnace is delivered,
it can be hooked up in an hour or
two!
~~~~~~~~~~~~~~~
Outdoor Wood Furnace
Prices
We now carry 5 sizes of
wood furnaces.
Choose from 20 different COLORS
with 8,000 different color
combinations!
POPULAR OPTIONS:
Solenoid Activated Damper with a
bigger 75 CFM fan/blower SAVES WOOD!
Now INCLUDED
Digital thermostat Ranco installed (not wired) with Dry Well
$125
Analog Thermometer $20
Delete the
siding and insulation -$300
Delete the built-in hot
water coil -$100
Chimney Cap - Now
INCLUDED
Propane/Waste Oil Burner Sleeve: $265
In addition to our standard prices.
(Complete prices shown above, installed)
We
now carry
4 sizes of
COAL
burning furnaces.
These models are specifically designed to burn coal. With
the fan feeding oxygen in from the bottom, the coal
burns easily. Simply but a wood furnace model (above) and add an
optional shaker grate to help get rid of the
clinkers.
Shaver Coal
Series 165
$5577 175,000 BTU and a 170 gallon water
tank. 3,000 - 3,500 sq
ft.*
Shaver Coal
Series 250 $6597
254,000 BTU and a 230 gallon water tank.
4,500 - 5,000 sq ft.*4,500
- 5,000 sq ft.*
Shaver Coal
Series 290 $6877
330,000 BTU and a 260 gallon water tank.
5,200 - 6,000 sq ft.*5,200
- 6,000 sq ft.*
Shaver Coal
Series 340 $7577
346,000 BTU and a 300 gallon water tank.
6,000 - 7,000 sq
ft.* 6,000 - 7,000 sq ft.*
ADD
$175 for the 1/2" thick
firebox.
OTHER POPULAR
OPTIONS:
Solenoid Activated Damper with the
bigger 75 CFM fan/blower - Now
INCLUDED
Digital thermostat Ranco with Dry
Well $110
Thermometer $20
Delete
the siding and insulation -$300
Delete the built-in
hot water coil -$100
Chimney Cap - Now
INCLUDED
ThermoWind Forced Air
Furnaces (no water)
ThermoWind 1000 $4297
ThermoWind 2000 $5047
ThermoWind 3000
$5497
ThermoWind 4000
$6697
The TW4000 has 2 furnace fans with 4
ducts (2 supply, 2 return) and 2 firebox doors -
one one each end, for easier loading of the 68"
deep firebox)
Options:
Larger Firebox Door
$200
Coal version with shaker grates (4200 -
$300 more)
FURNACE
DIMENSIONS
These
dimensions are the same for both wood and coal
burners.
Our new 1/2 firebox models are 2-500
lb heavier!
Shaver Pro Series 140
- 45" x 48.5" x 90" tall
Shaver Pro Series 165* - 45" x 54.5" x 90" tall
Shaver Pro Series
250* - 45" x 70.5" x 90" tall
Shaver Pro Series 290 - 45" x
78.5" x 90" tall
Shaver Pro Series 340 - 45" x
88.5" x 90" tall
* Our
two
most popular models (90% of sales)
FURNACE
DIMENSIONS
Weights shown are with a 3/8" thick
firebox
uncrated/crated,
followed by the shipping weights of the
1/2" firebox
uncrated/crated.
Shaver Pro
Series 165 - 1641/1883/1920/2227
Shaver Pro Series
250* - 1968/2275/2380/2687
Shaver Pro Series 290 -
2175/2586/2560/2970
Shaver Pro Series 340 -
2365/2920/2940/3945
*
* Our most
popular model (70% of
sales)
The uncrated weights
include a steel pallet, so to find out how much weight you
have to lift/move, you could deduct the weight of the
pallet below. The pallet will drop off when you lift
the furnace:
Pro Series 140 pallet weight = 100lbs
Pro Series 165 pallet weight = 100lbs
Pro Series 250 pallet weight = 160lbs
Pro Series 290 pallet weight = 160lbs
Pro Series 340 pallet weight = 180lbs
You can also ask
for pad delivery, for only $75, in which case we will move the
furnace to your pad (provided that we could get to
it safely, the ground is relatively level and not
muddy).
Crating
is necessary for freight delivery; $125 including a
steel pallet
FURNACE DIMENSIONS
These
dimensions are the same for both wood and coal
burners.
| FIREBOX
SIZES -
the depth is the only thing
that changes |
| Model |
Description |
Width¹ |
Depth |
Height
(approx) |
| 140 |
cylinder |
36” |
28” |
26”
+ 9” for Ash Pan* |
| 165 |
cylinder |
36” |
34” |
26”
+ 9” for Ash Pan* |
| 250 |
cylinder |
36” |
50” |
26”
+ 9” for Ash Pan* |
| 290 |
cylinder |
36” |
58” |
26”
+ 9” for Ash Pan* |
| 340 |
cylinder |
36” |
68” |
26”
+ 9” for Ash
Pan* |
¹
Outside dimension of
pipe.
* non-removable ash
pan. Easy to clean out with its own
door!
20 New Colors
FREE - to best suit your
surroundings!
Call for a full
page of color chips
828-683-0025
You can have the side, corners,
roof and roof trim in any
color or combination you want! You can also have
the front in a darker color too!
You can reach us by e-mail
at
or
DEALER ENQUIRIES WELCOME!
Please fill out our easy
application
We accept VISA, MasterCard,
Discover and AMEX,
Checks, Checks by Phone
as well as PayPal.
We also have FINANCING AVAILABLE through an
outside company.
Simply call us with your
card number
and we'll deliver your
furnace to your door - right away!
- Lower your utility bills! Wood is
very cheap or in many cases, FREE! You can
eliminate your gas or oil bill simply by using
a Shaver Outdoor Wood Furnace. Wood hasn't gone
up for years and is very plentiful. In many
cases our customers have enough wood falling on
their property to keep them going for life!
- Heating with wood outside of the
house is CLEANER! No more smoke, ashes, bark, bugs,
log piles and trash in the house. Instead of
moving the wood and mess indoors, the boiler is
outdoors - next to the wood.
- Heat your hot water with your Shaver
Furnace. Many people save $30-60 a month on
this feature alone! It takes care of all your
domestic hot water needs; the element in your
hot water heater need never come
on.
- Safety. Our furnace is made to
be situated in the yard, away from the house. The
usual distance is 50 to 100 feet. Outdoor
furnaces remove the dangers of wood stove fires
in the house. Any fire department that compares
the safety of indoor units versus outdoor ones
will have to admit that outdoor furnaces are
the winners; this safety feature is usually reflected in
lower insurance rates.
With less electronics and fans on the outside of our
furnaces, our unit is simpler and safer.
- One furnace can heat multiple
buildings; there is no need to purchase a heat source
for each. Simply run an extra PEX pipe to the
area you want to heat - even garages without an
existing furnace!
- Residential and commercial buildings,
motels, factories, restaurants can all be heated
easily with our furnaces.
Simple, clean and efficient, one unit can heat your house
or shop, garage, swimming pool, hot tub,
greenhouse or factory.*
SHAVER OUTDOOR WOOD FURNACE
Get
the BEST Outdoor Wood Burning Furnace
Made!
41
Years Strong!
Get
a SHAVER!
|
