Nature's Comfort EPA Phase II Qualified White Tag

GT-6000 Downdraft Gasification Wood Boiler - Furnace



Nature's Comfort NCB-80 Boiler

Nature's Comfort NCB-120 Boiler

Nature's Comfort NCB-175 Boiler

Nature's Comfort NCB-250 Boiler

Nature's Comfort NCB-275G Gasification Boiler

Nature's Comfort Wood Furnace NCB-325G Gasification

Nature's Comfort Wood Furnace NCB-400G Gasification Boiler

EPA Phase II Qualified WHITE TAG GT-6000 Downdraft Gasification Wood Furnace / Boiler


EPA Phase II Qualified GT-6000 Gasification Boiler   

EPA Phase II Qualified GT-6000 Downdraft Gasification Wood Boiler - Furnace:
Introductory Price only  $8,980

THOUSANDS LESS than the competition!



The GT-6000 high efficiency, smokeless burning, downdraft gasification outdoor wood furnace
is unique in that it contains over 670lbs of firebrick which makes for a tremendous flywheel effect
for storing heat and increases efficiency. Cleaning and operation is easy and the price is very
competitive compared to units of similar size and heating capacity.






Nature's Comfort GT-6000 Features  86% Efficient!





GT6000 flyer/brochure



How does the GT6000 work?

The new EPA Phase II Qualified GT-6000 Downdraft Gasification Wood Boiler is a 2-stage outdoor wood burning furnace that has a jet-engine inspired secondary burn chamber designed to heat the stage 1 burning wood exhaust to temperatures so high that unburned fuel left in the stage 1 exhaust is ignited for a 2nd stage of burning.

Special firebrick lines the firebox and the unique secondary burn chamber, the heart of the GT-220, making it a true smokeless burning gasification downdraft unit. The large amount of firebrick used in the GT-6000 is unique to Nature’s Comfort’s design and makes for a tremendous “flywheel” effect and greater efficiency.

The stage 1 exhaust from the burning wood in the firebox travels down through to the secondary burn chamber (gasification chamber). The exhaust is then ‘turbo boosted’ by super-heated forced air. This air boosts the combustion for the stage 2 burn, supplying oxygen to the fire which increases the heat and burn efficiency.

The firebrick reaches a ‘hyper-heated’ condition, causing the fire to burn even hotter. This is where gasification occurs. While wood normally burns at 800-1200F, the temperatures inside the gasification chamber can reach over 2600F. The stage 2 exhaust is then forced to travel in a spinning motion through refractory channels. This circulation helps the refractory to evenly transfer the heat to the steel, then to the water.

When researching competitor’s units, check to see if they utilize this technology.

Not wasting any heat, the stage 2 exhaust is then sent up through 2 sets of six pipes with butterfly diverters to again spin the hot exhaust gases. The heat exchanger pipes are surrounded by a flow of water from the circulating pump. This pulls even more heat into the water finishing the burning & heating process to make the GT Series the most efficient, reliable & cost effective gasification outdoor wood boiler you can find!


Download the GT6000 Wood Boiler Flyer


Please CALL and speak to Ben at 828-683-8055 or write to: